Bluetooth Scanner

Bluetooth Scanner

Connecting a BT Scanner:

Turn on the Scanner by holding down the small black button until you see the green and blue lights


After device is on scan this barcode. This will reset the scanner back to factory default


The device will now turn off and you will need to power it back on and scan this bar code


Now scan ONE OF THE TWO barcodes. This will give you the option to either have the scanner always on or power off after 8 continuous hours


Go to your “Settings” on the iPad and select “Bluetooth” and connect the Scanner device


Scanner successfully connected


Creating a New Retail item:

Go to “Products/Item”, “+Retail Item”


When imputing the information, it is important when filling out the “Sku Codes” to type in the full code name. Example: From the leading “3” to the ending “8”



After imputing the information, select the “Next” button


Enter inventory details and select “Update and Publish” when complete





    • Related Articles

    • S700 Scanner Setup

      Go into Bluetooth first and press the i with a blue circle and forget the socket s700 scanner before you proceed. See attached document for further information.   1. Then turn on the scanner and scan Step 1: this will make a sound and turn the ...

    • S700 & S740 Scanner Instructions

      Print this document on a good quality printer. Go into Bluetooth first and press the I with a blue circle and forget the socket s700 scanner before you proceed. 1.Then turn on scanner and scan Step 1: this will make a sound and turn the scanner off ...

    • eDynamo Pairing

      Hold the power button down for 3 seconds until the blue light flashes Go to “Operation” Enter 000000 and select pair Select “Hardware Settings” Select the eDynamo that you are connecting and after selecting a “Check Mark” will appear

    • Scanning of QR Code to Attach the Customer

      Steps to connect the QR Code scanner with the POS: 1)      Should confirm both the devices [QR Code reader and POS] should be Bluetooth- enabled. 2)      The QR code scanner should be paired with the POS device via Bluetooth. 3)      Pick out the ...

    • Build Version 2.1.12 (1.0) - Release Notes

      FEATURE LIST  Both Back Office and iPad Alternate Printer on printer failure Currently, the kitchen print and the label print will not be printed if the respective printer got failure. Hence a new feature Alternate Printer has been introduced to make ...