EPSON TM-U220B

Note:  This information is available in a Word document and PDF file at the bottom of the page. 

To locate the IP Address for printer:

On the back of the printer you will need to hold down the reset button (using a paper clip) until the “Dynamic Status Sheet” prints

As Shown: Dynamic Status Sheet, this will show the IP Address

Factory Reset:

Turn off the printer and with a paper clip hold in the reset button on the back of the printer, while holding down the button turn the printer on. Keep holding rest button until the “Reset” ticket prints

As Shown: This is the “Factory Default” ticket. Now the IP Address is rest and must change it to be static as well as changed on the LINGA BOH

• Related Articles

• EPSON TM-M30 Wireless Printer

  Note:  This information is available in a Word document and PDF file at the bottom of the page.  ​ Setting up printer in BOH: Select “Settings”, “Printer Configuration”, “Receipt Printers” Select “+Receipt Printer” Type in the IP address from the ...

• EPSON TM-M30 IP Connection

  Note:  This information is available in a Word document and PDF file at the bottom of the page.  1.    Plugin network Cable press the paper feed button then turn the power on.         2.     You will see the ! display on the screen release the feed ...

• EPSON TM-M30 - USB Printer

  Installing Interface Plugin: Download: https://drive.google.com/file/d/1bLNfwTPGrysdKl126taDlduPyEIRIFw1/view Installing Zadig: Download: https://zadig.akeo.ie/ Go to http://web.lingapos.com/#/auth/pin Go to http://web.lingapos.com/#/auth/pin

• EPSON TM - L 90 Label Printer

  Attached are the directions for the EPSON TM - L 90 Label Printer. 

• Scale Setup Via Epson Printer Guide

  Attached below is a guide to our Epson printer scale setup.