Full Start of Day Process

Start of Day process:

Enter 4-digit pin and select “Clock In”

Starting Till:

Select “Operation”

Select “Till Management”

Enter the amount of money that is needed to start the till and select “Continue”

The Till is now active

Starting a Global Till:
Enable “Global Till” Enter the amount of money that is needed to start the till and select “Continue”

Global Till is now active

• Related Articles

• End of Day Process

  View closed checks: Select “All” Select “Closed” here you will confirm that all checks are closed How to make Tip Adjustments: Select “Operation” Select “Batch/Tip Adjustment Select on the “Tip” that needs to be adjusted Change the Tip amount and ...

• Start and Close Till

  How to Start the Till: Log in with ID number and select “Operation” Select “Till Management” Select “Set Till” Insert the amount of money you would like in the Till and press “Continue” Screen shows Till that is Active How to Close a Till: Select the ...

• Kitchen Display System Quick Start

• Star SP700

  Note:  This information is available in a Word document and PDF file at the bottom of the page.  Perform a Self-Test: Hold down the Feed button and turn on the Printer, release your finger from the feed button (after 3 seconds) to print Self-Test ...

• Time Clock Feature - Enabling Paid/Unpaid Breaks

  To view the full Time Clock document with added reference photos of the back office and front of house, download out document version at the bottom of the page. Introduction This document explains - Time Clock Requirement ∙ An option for the employer ...