Bluetooth Scanner
Zebra DS2278 Scanner
Introduction The Zebra DS2278 Scanner can be used for Native IOS via Bluetooth. It currently works with Special Build Version 5.3(1.7.5) or higher. Testing for this manual was done on 5.3(1.9). If the setup of this device is attempted on any older ...
S700 & S740 Scanner Instructions
Print this document on a good quality printer. Go into Bluetooth first and press the I with a blue circle and forget the socket s700 scanner before you proceed. 1.Then turn on scanner and scan Step 1: this will make a sound and turn the scanner off ...
S700 Scanner Setup
Go into Bluetooth first and press the i with a blue circle and forget the socket s700 scanner before you proceed. See attached document for further information. 1. Then turn on the scanner and scan Step 1: this will make a sound and turn the ...
Bluetooth Scanner
Connecting a BT Scanner: Turn on the Scanner by holding down the small black button until you see the green and blue lights After device is on scan this barcode. This will reset the scanner back to factory default The device will now turn off and you ...