S700 & S740 Scanner Instructions

S700 & S740 Scanner Instructions

Print this document on a good quality printer.

Go into Bluetooth first and press the I with a blue circle and forget the socket s700 scanner before you proceed.

1.Then turn on scanner and scan Step 1: this will make a sound and turn the scanner off

2. Turn the scanner back on and wait until you see the blue Bluetooth light flashing

3.  Scan Step 2 and it should make beep sound

4. scan step 3 sometimes when you hold the button down you need to slowly pull away the scanner for it to read it and it should make a beep sound.

5. For the model 740 BT Scanner only

Scan the desired scan method you want to use before complete setup.

6. On the last page scan the barcode for Scanner Always On

7. On the iPad go to Bluetooth under other device you will see the scanner touch it and it should show up in my devices as connected.

8. Force close the pos app and start it again it should now it should work

9. This setup takes care of mast Standard bar codes.



 


 




    • Related Articles

    • S700 Scanner Setup

      Go into Bluetooth first and press the i with a blue circle and forget the socket s700 scanner before you proceed. See attached document for further information.   1. Then turn on the scanner and scan Step 1: this will make a sound and turn the ...

    • Bluetooth Scanner

      Connecting a BT Scanner: Turn on the Scanner by holding down the small black button until you see the green and blue lights After device is on scan this barcode. This will reset the scanner back to factory default The device will now turn off and you ...

    • Star SP700

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  Perform a Self-Test: Hold down the Feed button and turn on the Printer, release your finger from the feed button (after 3 seconds) to print Self-Test ...

    • EPSON TM-M30 IP Connection

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  1.    Plugin network Cable press the paper feed button then turn the power on.         2.     You will see the ! display on the screen release the feed ...

    • Build Version 2.1.12 (1.0) - Release Notes

      FEATURE LIST  Both Back Office and iPad Alternate Printer on printer failure Currently, the kitchen print and the label print will not be printed if the respective printer got failure. Hence a new feature Alternate Printer has been introduced to make ...